D-Link DXS-3600 Series Cli Reference Manual page 949

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
By default the OSPF virtual link switch is turned off if the OSPF debug function is turned on.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on or turn off the OSPF virtual link debug switch. When the event related to the
OSPF virtual link happens, the debug information will print.
Example
This example shows how to turn on the OSPF virtual link debug switch.
Switch# debug ip ospf virtual-link
Switch#
Virtual link up transit area 1.1.1.1 vnbr 3.3.3.3 tic 260
75-50 debug ip ospf route
This command is used to turn on the OSPF route debug switch. Use the no form of the command to turn
off the OSPF route debug switch.
debug ip ospf route
no debug ip ospf route
Parameters
None.
Default
By default the OSPF route switch is turned off.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on or turn off the OSPF route debug switch. When one OSPF route is added,
updated or deleted, the debug information will print if the OSPF debug function is turned on.
Example
This example shows how to turn on the OSPF route debug switch.
Switch# debug ip ospf route
Switch#
Add an OSPF route level 1 dst 172.18.1.1 mask 255.255.255.0
tic: 300
944
nh cnt 1 cost 10 cost2: 0