D-Link DXS-3600 Series Cli Reference Manual page 973

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
The information displayed by the show ipv6 ospf command is useful in debugging OSPF routing
operations.
Example
This example shows how to display general information about OSPF routing processes.
Switch#show ipv6 ospf
Routing Process "OSPFv3 3600" with ID 36.0.0.0
Process uptime is
Conforms to RFC 2740
This router is an ABR; ABR Type is Standard (OSPFv3).
This router is an ASBR (injecting external routing information).
Redistributing External Routes from,
rip with metric 0 with metric-type 2
SPF schedule delay 5 secs, Hold time between SPFs 10 secs
Number of LSA originated 159
Number of LSA received 299
Number of areas in this router is 5
Area 0.0.0.0 (BACKBONE) (active)
Number of interfaces in this area is 7 active interface number is 7
Number of fully adjacent virtual neighbors through this area is 0
SPF algorithm executed 15 times
Number of LSA 44. Checksum Sum 0x15c2dc
Number of Unknown LSA 0
Area ranges are
Area 0.0.0.1 (active)
Number of interfaces in this area is 1 active interface number is 1
Number of fully adjacent virtual neighbors through this area is 0
SPF algorithm executed 4 times
Number of LSA 48. Checksum Sum 0x185c7f
Number of Unknown LSA 0
Area ranges are
Area 0.0.0.3 (active)
Number of interfaces in this area is 1 active interface number is 1
Number of fully adjacent virtual neighbors through this area is 1
SPF algorithm executed 5 times
Number of LSA 25. Checksum Sum 0xf2d7f
Number of Unknown LSA 0
Area ranges are
Area 0.0.0.5 (active)
Number of interfaces in this area is 1 active interface number is 1
Number of fully adjacent virtual neighbors through this area is 0
SPF algorithm executed 3 times
Number of LSA 26. Checksum Sum 0xe7047
Number of Unknown LSA 0
Area ranges are
0DT1H8M45S
968