D-Link DXS-3600 Series Cli Reference Manual page 998

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
By default, this option is disabled.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enable or disable the specified port's EEE power saving function. The Energy-
Efficient Ethernet (EEE) power-saving mode saves power consumption while a link is up when there is
low utilization of packet traffic. The physical interface will enter into a Low Power Idle (LPI) mode when
there is no data to be transmitted. In the EEE power-saving mode, power consumption is scalable to the
actual bandwidth utilization.
Example
This example shows how to enable the EEE power saving function.
Switch# configure terminal
Switch(config)# interface ethernet 1/1/1
Switch(config-if)# power-saving eee
Switch(config-if)#
79-4 power-saving dim-led time-range
This command is used to configure the time range profile for the dim LED schedule. Use the no form of
the command to delete the specified time range profile.
power-saving dim-led time-range PROFILE-NAME
no power-saving dim-led time-range PROFILE-NAME
Parameters
PROFILE-NAME
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to add or delete a time range profile for the dim LED schedule. When the schedule is
up, all port's LED will be turned off.
Example
This example shows how to add a time-range profile for the dim LED schedule.
Switch# configure terminal
Switch(config)# power-saving dim-led time-range off-duty
Specifies the name of the time range profile to be configured. The
maximum length is 32 characters.
993