Show Mls Qos Interface - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the configured aggregated policer.
Example
This example shows how to display the aggregate policer.
Switch# show mls qos aggregate-policer
mls qos aggregate-policer agg-policer5 10 1000 conform-action transmit exceed-action
drop
mls qos aggregate-policer agg-policer5 cir 500 bc 10 pir 1000 be 10 conform-action
transmit exceed-action set-dscp-transmit 2 violate-action drop
Switch#
87-24

show mls qos interface

This command is used to display port level QoS configurations.
show mls qos interface INTERFACE-ID [, | -] {cos | scheduler | trust | rate-limit | queue-rate-limit
| dscp-mutation | map {dscp-color | cos-color | dscp-cos}}
Parameters
interface INTERFACE-ID
,
-
cos
scheduler
trust
rate-limit
queue-rate-limit
dscp-mutation
map dscp-color
(Optional) Specifies the name of the aggregate policer.
Specifies the interface ID to display.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and after
the comma.
(Optional) Specifies a range of interfaces. No space is allowed before
and after the hyphen.
Specifies to displays the port default CoS.
Specifies to displays the transmit queue scheduling settings.
Specifies to displays the port trust State.
Specifies to displays the bandwidth limitation configured for the port.
Specifies to displays the bandwidth allocation configured for the
queue.
Specifies to displays the DSCP mutation map attached to the interface.
Specifies to displays the DSCP to color map.
1105