D-Link DXS-3600 Series Cli Reference Manual page 1054

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Expires
83-21 show ip pim rp-hash
This command is used to display the rendezvous point (RP) to be chosen based on the group selected.
show ip pim rp-hash GROUP-ADDRESS
Parameters
GROUP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the RP selected for the specified group.
Example
This example shows how to display the RP with the group address 238.10.10.10.
Switch# show ip pim rp-hash 238.10.10.10
RP: 10.20.30.1
Info source: 10.20.30.1, via bootstrap
Uptime: 0DT01H42M15S, expires: 0DT00H02M16S
Switch#
This example shows how to display the RP with the group address 225.1.1.1.
Switch#show ip pim rp-hash 225.1.1.1
RP: 1.1.1.10
Info source: static
Switch#
router has known about this RP.
The time (in day, hours, minutes, and seconds) after which the
information about this RP expires. If the router does not receive any
refresh messages in this time, it will discard information about this RP.
Specifies the group address to display the selected RP for the group.
1049