D-Link DXS-3600 Series Cli Reference Manual page 952

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
packet
neighbor
spf
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to reset OSPF statistic counters. After the reset, the specified counters will change to
0.
Example
This example shows how to reset all OSPF statistic counters.
Switch# debug ip ospf clear counter
Switch#
75-54 debug ip ospf show database
This command is used to view detailed information about the OSPF LSDB.
debug ip ospf show database {rt-link | net-link | summary-link | external-link | type7-link} [vrf
VRF-NAME]
Parameters
rt-link
net-link
summary-link
external-link
type7-link
vrf VRF-NAME
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Specifies to reset the OSPF packet counter.
Specifies to reset the OSPF neighbor counter.
Specifies to reset the OSPF SPF event counter.
Specifies to display detailed information of Router LSAs.
Specifies to display detailed information of Network LSAs.
Specifies to display detailed information of Summary LSAs.
Specifies to display detailed information of AS external LSAs.
Specifies to display detailed information of type-7 LSAs.
(Optional) Specifies the name of the VPN routing and forwarding
(VRF) instance. This name can be up to 12 characters long.
947