D-Link DXS-3600 Series Cli Reference Manual page 1034

Layer 2/3 managed 10gigabit
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Assert State: No Info, Assert Timer: off
Assert Winner: ::, Metric: 0, Pref: 0
(3ffe:6000:1005::DD, ff13::10, rpt) Uptime: 0DT00H00M05S, Flags:S
RP: 3ffe:6000:1005::36, RPF nbr: FE80::217:55FF:FEC0:16, RPF Interface: vlan101
Upstream Interface:
Prune State: Not Pruned, Override Timer: off
Downstream Interface List:
vlan11:
Prune State: No Info, ET: off, PPT: off
Total Entries: 3
Switch#
Display Parameters
Uptime
Flags
RP
RPF nbr
RPF interface
Join State
Join Timer
Downstream Interface List
vlan11
JP State
PPT
ET
Assert State
Assert Timer
Assert Winner
Metric
Pref
The time that entry has been created.
The entry's Sparse/SPT-bit information.
The Rendezvous Point (RP) of the (*, G) mroute entry.
The Reserve Path Forwarding (RPF) neighbor address.
The local interface name that connect to the upstream router.
The upstream Join state whether the local router should join the RP
tree for the group or join the shortest-path tree for the source and
group represented by this entry.
The time remaining before the local router next sends a periodic Join
message.
The downstream interface(s) protocol state information.
The interface name of the downstream interface.
The state resulting from (*, G) or (S, G) Join/Prune messages received
on this interface.
The Prune Pending Timer. The remaining time that allows other router
to override the join or prune.
The Expiry Timer. The remaining time before the Join state for the
interface expire.
The assert state of the interface.
The Assert Timer. If the interface is an Assert Winner, then this timer is
the remaining time before the interface to send a assert message. If
the interface is an Assert Loser, then this timer is the remaining time
before the Assert State expires.
When the Assert State is Loser, this field is the IP address of the
Assert Winner. Otherwise, it is always "::".
When the Assert State is Loser, this field is metric of the route to the
RP/Source that is advertised by the Assert Winner.
The Preference. When the Assert State is Loser, this field is metric
preference of the route to the RP/Source that advertised by the Assert
Winner.
1029

Advertisement

Table of Contents
loading

Table of Contents