D-Link DXS-3600 Series Cli Reference Manual page 507

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display information of the ERP instance.
Example
This example shows how to display detailed information of ERP instances.
Switch# show ethernet ring g8032 status
ERPS Version: G.8032v2
Erps trap Status: Enabled
--------------------------------
Ethernet Ring "major-Ring"
Admin Port0 : ethernet 1/0/1
Admin Port1 : ethernet 1/0/2
Ring Type
Ring ID
------------------------------------
Instance : 1
Instance Status: Idle
R-APS Channel: 2, Protected VLAN: 10-20
Port0 : eth1/0/1, Blocking
Port1 : eth1/0/2, forwarding
Profile: Campus
Description:
Guard timer: 500 milliseconds
Hold-Off Timer: 0 milliseconds
WTR Timer: 5 minutes
Non-revertive
MEL: 1
RPL role：Owner
RPL Port : Port0
Sub ring instance : none.
Instance : 2
Instance Status: Idle
R-APS Channel: 2, Protected VLAN: 10-20
Port0 : eth1/0/1, Blocking
Port1 : eth1/0/2, forwarding
Profile: Campus
Description:
Guard Timer: 500 milliseconds
Hold-off Timer: 0 milliseconds
WTR Timer: 5 minutes
Non-revertive
MEL: 1
RPL role：Owner
RPL Port : Port0
Sub ring instance : 3, TC Propagation State : Enable
: Major_ring
: 1
502