D-Link DXS-3600 Series Cli Reference Manual page 1140

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
show rmon statistics
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Statistics for all of the configured entries are displayed.
Example
This example shows how to display the RMON statistics.
Switch# show rmon statistics
Index 32, owned by it@domain.com, Data Source is
Received Octets : 234000, Received packets : 9706
Broadcast packets: 2266, Multicast packets: 192
Undersized packets: 213, Oversized
Fragments: 2, Jabbers: 1
CRC alignment errors: 0, Collisions: 0
Drop events : 0
Packets in 64 octets: 256, Packets in 65-127 octets : 236
Packets in 128-255 octets : 129, Packets in 256-511 octets : 10
Packets in 512-1023 octets : 38, Packets in 1024-1518 octets : 2200
Switch#
90-9 snmp-server enable traps rmon
This command is used to enable the RMON trap state.
snmp-server enable traps rmon [rising-alarm | falling-alarm]
no snmp-server enable traps rmon [rising-alarm | falling-alarm]
Parameters
rising-alarm
falling-alarm
Default
By default, this option is disabled.
Command Mode
packets: 24
Specifies to configure the rising alarm trap state.
Specifies to configure the falling alarm trap state.
1135
eth4/0/3