D-Link DXS-3600 Series Cli Reference Manual page 954

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to check the information about LSAs that OSPF is requesting to neighbors
Example
This example shows how to display current requested LSAs.
Switch# debug ip ospf show request-list
OSPF Request List:
*Area 0.0.0.0:
Circuit: 1.1.1.1
Neighbor: 90.2.0.1
LSID: 192.194.134.0
LSID: 192.194.135.0
LSID: 192.194.136.0
LSID: 192.194.137.0
LSID: 192.194.138.0
Switch#
75-56 debug ip ospf show redistribution
This command is used to display the current internal OSPF redistribution list.
debug ip ospf show redistribution [vrf VRF-NAME]
Parameters
vrf VRF-NAME
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to check the information about the external routes imported into OSPF.
Example
IP: 1.1.1.2
RTID: 90.2.0.1
RTID: 90.2.0.1
RTID: 90.2.0.1
RTID: 90.2.0.1
RTID: 90.2.0.1
(Optional) Specifies the name of the VPN routing and forwarding
(VRF) instance. This name can be up to 12 characters long.
949