D-Link DXS-3600 Series Cli Reference Manual page 1058

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
84-5 show ip pim snooping mroute
This command is used to display PIM snooping multicast routing information on the switch.
show ip pim snooping mroute [vlan VLAN-ID | group GROUP-ADDRESS]
Parameters
vlan VLAN-ID
group GROUP-ADDRESS
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display PIM snooping multicast routing information on the switch.
Example
This example shows how to display PIM snooping multicast routing information on the switch.
Switch# show ip pim snooping mroute
Timers: PPT - Prune Pending Timer, ET - Expiry Timer
VLAN 1, (*, 226.1.1.1)
Uptime/Expire: 0DT00H07M21S/0DT00H03M08S
Downstream ports: 1/0/23
Outgoing ports: 1/0/23, Local
Port 1/0/23, JPState:Join, Exp:0DT00H03M08S
Upstream neighbor: 36.90.90.100 learned on port Local
VLAN 1, (*, 226.1.1.2)
Uptime/Expire: 0DT00H07M21S/0DT00H03M08S
Downstream ports: 1/0/23
Outgoing ports: 1/0/23, Local
Port 1/0/23, JPState:Join, Exp:0DT00H03M08S
Upstream neighbor: 36.90.90.100 learned on port Local
VLAN 1, (1.3.3.5, 226.1.1.2, rpt)
Uptime/Expire: 0DT00H07M18S/0DT00H03M08S
Downstream ports: 1/0/23
Outgoing ports: 1/0/23, Local
Port 1/0/23, JPState:Pruned, Exp:0DT00H03M08S
Upstream neighbor: 36.90.90.100 learned on port Local
(Optional) Specifies the VLAN to be displayed.
(Optional) Specifies the group address to display the mroute for the
group.
PPT/ET: -/0DT00H03M08S
PPT/ET: -/0DT00H03M08S
PPT/ET: -/0DT00H03M08S
1053