D-Link DXS-3600 Series Cli Reference Manual page 1434

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
intf-name: Interface name.
Safeguard
Log Description
Event description: When the CPU utilization is over the rising threshold, the switch
enters exhausted mode.
Log Message: Unit <unit-id>, Safeguard Engine enters EXHAUSTED mode.
Parameters description:
unit-id: the unit ID
Event description: When the CPU utilization is lower than the falling threshold, the
switch enters normal mode.
Log Message: Unit <unit-id>, Safeguard Engine enters NORMAL mode.
Parameters description:
unit_id: the unit ID.
SNMP
Log Description
Event Description: SNMP request received with invalid community string
Log Message: SNMP request received from <ipaddr> with invalid community
string.
Parameters Description:
ipaddr: The IP address.
SSH
Log Description
Event description: SSH server is enabled.
Log Message: SSH server is enabled
Event description: SSH server is disabled.
Log Message: SSH server is disabled
Event description: This log will be generated when SSH log failed (not via AAA
method).
Log Message: Login failed through SSH (Username: <username>, IP: <ipaddr |
ipv6address>).
Parameters description:
username: User name which logs in fail.
ipaddr: IP address of host from which the user logged in.
ipv6address: IPv6 address of host from which the user logged in.
Stacking
Log Description
Event description: Hot insertion.
1429
Severity
Warning
Informational
Severity
Informational
Severity
Informational
Informational
Critical
Severity
Informational