D-Link DXS-3600 Series Cli Reference Manual page 680

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display UDP helper address table.
Example
This example shows how to display UDP helper address table.
Switch# show ip helper-address
Interface
----------
vlan1
20.20.20.20
vlan3
Switch#
53-7 show ip forward-protocol udp
This command is used to display all specified UDP ports' information.
show ip forward-protocol udp
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display all specified UDP ports' information.
Example
This example shows how to display all specified UDP ports' information.
Switch# show ip helper-address
Helper-address VRF
--------------- -------------
10.10.10.10
vpn-a
20.20.20.20 vpn-b
20.20.20.30 vpn-a
30.30.30.30 vpn-b
12.12.12.12
66.66.66.66 vpn-b
675