D-Link DXS-3600 Series Cli Reference Manual page 1363

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
vpls100
vpls100
Total Entries: 8
Switch#
117-11 show mpls l2transport vc
This command is used to display VC information for VPWS and VPLS.
show mpls l2transport vc [VC-ID] [detail]
Parameters
VC-ID
detail
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display VC (detailed) information for VPWS and VPLS.
Example
This example shows how to display all VC information including VPWS and VPLS.
Switch# show mpls l2transport vc
VC ID
-------------- ---------------- ----------------- --------- -------- -----------
1
2
3
4
5
Total Entries: 5
Switch#
This example shows how to display detailed VC information for a VPLS.
Switch# show mpls l2transport vc 5 detail
VC ID: 5, Peer IP Address: 120.1.1.2, Operate Status: Up
(Optional) Specifies the PW ID. The range is from 1 to 4294967295.
(Optional) Specifies to display detailed VC information.
Peer Local AC
150.1.1.4 eth1/0/0-VLAN2
130.1.1.2 eth1/0/1-VLAN3
140.1.1.2 vpls100
160.1.1.2 vpls100
120.1.1.2 vpls101
1358
00-08-A1-79-9A-E5 101/1.1.1.1
00-08-A1-79-9A-E6 101/1.1.1.1
MTU Type
1500 Raw
1500 Tagged
1500 Tagged
1500 Tagged
1500 Tagged
Oper Status
Up
Down
Up
Standby
Up