D-Link DXS-3600 Series Cli Reference Manual page 1323

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
1/0/1
1/0/2
1/0/3
Switch#
Display Parameters
URPF Global State
Save And Reboot Required
State
Port
Reachable-Via
Allow-Default
IP Access List Name
IPv6 Access List Name
Enabled Any
Disabled rx
Enabled rx
The global state of Unicast RPF checking.
Indicates that the configured Unicast RPF global state does not take
effect until after the next reboot.
The state of Unicast RPF.
The port number.
The mode how Unicast RPF examines the incoming packets.
Indicates whether allows the use of the default route for RPF
verification.
Indicates the name of the IP ACL to be checked.
The empty string indicates the IP Access List Name is not specified.
Indicates the name of the IPv6 ACL to be checked.
The empty string indicates the IPv6 Access List Name is not specified.
True v4gateway
v6gateway
False
v6Acl1
True v4Acl2
1318