Show Isis Topology - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
LSP-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the IS-IS LSPs database.
Example
This example shows how to display the IS-IS LSPDB summary information.
Switch# show isis database
Area (null):
IS-IS level-2 Link State Database:
LSPID
RA.00-00
RB.00-00
RC.00-00
RC.01-00
Switch#
Display Parameters
Area
LSPID
LSP Seq Num
LSP Checksum
LSP Holdtime
ATT/P/OL
48-39

show isis topology

This command is used display the IS-IS path to the Intermediate System.
show isis [AREA-TAG] topology [l1 | l2 | level-1 | level-2]
Parameters
(Optional) Specifies to display the LSP with the specified LSPID.
Displays the contents of a single LSP by its ID number.
LSP Seq Num LSP Checksum
* 0x00000006 0xE8AD
0x00000005 0x7E6A
0x00000004 0x2EAD
0x00000004 0xBBFF
The IS-IS instance area tag.
The LSP ID of the LSP.
The LSP sequence number.
The checksum of the LSP.
The lifetime of the LSP.
The flags of the LSP.
ATT - Attached flag.
P - Supported to repairing partition.
OL - Overload flag.
LSP Holdtime ATT/P/OL
767 0/0/0
1001 0/0/0
898 0/0/0
812 0/0/0
618