D-Link DXS-3600 Series Cli Reference Manual page 525

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
A file can be renamed to a file located either within the same directory or to another directory.
Example
This example shows how to rename file called "doc.1" to "test.txt".
Switch# rename /c:/doc.1 /c:/test.txt
Rename file doc.1 to text.txt? (y/n) [n] y
Switch#
41-8 rmdir
This command is used to remove a directory in the file system.
rmdir DIRECTORY-NAME
Parameters
DIRECTORY-NAME
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to remove a directory in the working directory.
Example
This example shows how to remove a directory called "newdir" under the current directory.
Switch# rmdir newdir
Remove directory newdir? (y/n) [n] y
The directory is removed
Switch#
41-9 show storage media-info
This command is used to display the storage media's information.
show storage media-info [unit UNIT-ID]
Parameters
Specifies the name of the directory.
520