D-Link DXS-3600 Series Cli Reference Manual page 791

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display MLD group information by command.
Example
This example shows how to display MLD snooping group information.
Switch# show ipv6 mld snooping groups
MLD Snooping Connected Group Membership:
VLAN ID Group address
------- -------------------
1 FF1E::
1 FF1E::3
1 FF1E::4
Total Entries: 3
Switch#
66-21 show ipv6 mld snooping mrouter
This command is used to display MLD snooping multicast router information automatically learned or
manually configured on the switch.
show ipv6 mld snooping mrouter [vlan VLAN-ID [,|-]]
Parameters
vlan VLAN-ID [,|-]
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display dynamically learned or manually configured multicast router interfaces.
Example
Source address
-------------------
*
*
3620:110:1::3a2b
(Optional) Specifies the VLAN. If no VLAN is specified, MLD snooping
Multicast Router Information on all VLANs will be displayed.
786
FM Exp(sec) Interface
-- -------- ---------
EX 258 2/0/7
EX 258 2/0/7
IN 258 2/0/7