D-Link DXS-3600 Series Cli Reference Manual page 589

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
-
gbic
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays GBIC status information.
Example
This example shows how to display GBIC status information.
Switch# show interfaces gbic
eth1/0/25
Interface Type: 10GBASE-R
Laser Identifier: SFP
Connector Type: LC
Ethernet Compliance Code: 10G Base-SR
Encoding: 64B/66B
Vendor Name: Vendor
Vendor OUI: 0 :90:65
Vendor PN: PN1234568790
Vendor Rev: A2
Vendor SN: SN1234567890
Date Code: 110303
Received Power Measurements Type: Average Power
Compatibility: Single Mode (SM),10300Mbd, 850nm
Transfer Distance:
50/125 um OM2 fiber: 80m
62.5/125 um OM1 fiber: 30m
50/125 um OM3 fiber: 300m
eth1/0/26
Interface type: 10GBASE-R
eth1/1/1
Interface Type: 40GBASE-SR
Laser Identifier: QSFP +
Extended Identifier: Power Class 1 Module, No CDR in TX, No CDR in RX
Connector Type: Copper Pigtail
Ethernet Compliance Code: 40GBASE-CR4
Encoding: 64B66B
Vendor Name: Vendor
Vendor OUI: 0 :18:97
Vendor PN: PN1234567891
after the comma.
(Optional)Specifies a range of interfaces. No spaces are allowed
before and after the hyphen.
Specifies to display GBIC status information.
584