D-Link DXS-3600 Series Cli Reference Manual page 1216

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch(config)# smtp recipient receiver@domain.com
Switch(config)#
100-4 smtp interval
This command is used to configure the SMTP interval time. Use the no form of the command to recover
to the default value.
smtp interval MINUTES
no smtp interval
Parameters
MINUTES
Default
By default, this value is 30 minutes.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to configure the SMTP sending interval that the switch uses.
Example
This example shows how to configure the interval to 10 minutes.
Switch# configure terminal
Switch(config)# smtp interval 10
Switch(config)#
100-5 show smtp
This command is used to display SMTP information.
show smtp
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Specifies the SMTP sending interval. If set to 0, switch will send a mail
for each event immediately.
1211