DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Mode
ERP Instance Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
A clear command will remove the effects of the force and manual commands.
The clear command also provides the following functions:
•
Triggers revertive switching before the WTR or WTB timer expires in the case of revertive
operations.
•
Triggers revertive switching in the case of non-revertive operations.
Example
This example shows how to clear the local manual command on the major ring instance 1.
Switch# configure terminal
Switch(config)# ethernet ring g8032 major-ring
Switch(config-erp)# instance 1
Switch(config-erp-instance)# erps manual switch ring_port port0
Switch(config-erp-instance)# clear
Switch(config-erp-instance)#
39-24
erps version
This command is used to configure the ERP version. Use the no command to return this to the default
option.
erps version {g.8032v1 | g.8032v2}
no erps version
Parameters
g.8032v1
g.8032v2
Default
By default, G.8032v2 is used.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
G.8032v2 fully provides the following enhanced functions:
•
Supports multi-instance in a physical ring.
•
Supports operation commands: manual, force, and clear.
Specifies to use the G.8032v1 ERP version.
Specifies to use the G.8032v2 ERP version.
510