D-Link DXS-3600 Series Cli Reference Manual page 788

Layer 2/3 managed 10gigabit
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
66-17
ipv6 mld snooping minimum-version
This command is used to configure the minimum version of MLD hosts which MLD that is allowed on the
interface. Use the no form of this command to remove the restriction from the interface.
ipv6 mld snooping minimum-version 2
no ipv6 mld snooping minimum-version
Parameters
None.
Default
No limit on minimum version.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The command is only available for VLAN interface configuration. This setting only applies to filtering of
MLD membership reports.
Example
This example shows how to restrict all MLDv1 hosts to join.
Switch# configure terminal
Switch(config)# vlan 1
Switch(config-vlan)# ipv6 mld snooping minimum-version 2
Switch(config-vlan)#
66-18
show ipv6 mld snooping
This command is used to display MLD snooping information on the switch.
show ipv6 mld snooping [vlan VLAN-ID]
Parameters
VLAN-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
(Optional) Specifies the VLAN to be displayed.
783

Advertisement

Table of Contents
loading

Table of Contents