D-Link DXS-3600 Series Cli Reference Manual page 632

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
By default, this function is turned off.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on or turn off the IS-IS neighbor state debug switch. When IS-IS neighbor state
changes or some events happen to change neighbor state, debug information will print if the IS-IS debug
function is turned on. Use the debug isis command to turn on the IS-IS debug function.
Example
This example shows how to turn on the IS-IS neighbor state debug switch.
Switch# debug isis neighbors
Switch#
48-50 debug isis packets
This command is used to turn on the IS-IS packet debug switch. Use the no command to turn off the IS-
IS packet debug switch.
debug isis packets
no debug isis packets
Parameters
None.
Default
By default, this function is turned off.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on or turn off the IS-IS packet debug switch. When IS-IS packets were received
or transmitted, debug information will print if the IS-IS debug function is turned on. Use the debug isis
command to turn on the IS-IS debug function.
Example
This example shows how to turn on the IS-IS packet debug switch.
Switch# debug isis packets
Switch#
48-51 debug isis lsp
627