Show Ip Igmp Snooping Groups - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Robustness value
Last member query interval
Proxy reporting
Rate limit
Ignore topology change
Total Entries: 1
Switch#
46-21

show ip igmp snooping groups

This command is used to display IGMP snooping group information learned on the switch.
show ip igmp snooping groups [vlan VLAN-ID [,|-] | [IP-ADDRESS]
Parameters
vlan VLAN-ID [,|-]
IP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display IGMP snooping group information.
Example
This example shows how to display IGMP snooping group information.
Switch# show ip igmp snooping groups
IGMP Snooping Connected Group Membership:
VLAN ID Group address
------- ---------------
1 239.255.255.250
Total Entries: 1
Switch#
: 2
: 1 seconds
: Enabled (Source 1.2.3.4)
: 0
: Disabled
(Optional) Specifies the VLAN interface to be displayed. If no VLAN is
specified, IGMP snooping group information of all VLANs will be
displayed, at which IGMP Snooping is enabled.
(Optional) Specifies the group IP address to be displayed. If no IP
address is specified, all IGMP group information will be displayed.
Source address FM
--------------- --
* EX
568
Exp(sec) Interface
-------- ---------
382 2/0/7