Show Interfaces - D-Link DXS-3600 Series Cli Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
rxOversizedPkts
rxFragmentPkts
rxJabbers
rxSymbolErrors
rxDropPkts
txCollisions
ifInErrors
ifOutErrors
ifInDiscards
ifInUnknownProtos
ifOutDiscards
txDelayExceededDiscards
txCRC
dot3StatsAlignmentErrors
dot3StatsFCSErrors
dot3StatsSingleColFrames
dot3StatsMultiColFrames
dot3StatsSQETestErrors
dot3StatsDeferredTransmisions
dot3StatsLateCollisions
dot3StatsExcessiveCollisions
dot3StatsInternalMacTransmitErrors : 0
dot3StatsCarrierSenseErrors
dot3StatsFrameTooLongs
dot3StatsInternalMacReceiveErrors
linkChange
Switch#

47-6 show interfaces

This command is used to display the interface information.
show interfaces [INTERFACE-ID [,|-]]
Parameters
INTERFACE-ID
,
-
Default
None.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
(Optional) Specifies that the interface can be a physical port, VLAN,
loopback interface, or other.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces are allowed before and
after the comma.
(Optional)Specifies a range of interfaces. No spaces are allowed
before and after the hyphen.
577