D-Link DXS-3600 Series Cli Reference Manual page 836

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to configure the name of an MST region. To return to the default name, use the no
form of this command.
name NAME
no name NAME
Parameters
NAME
Default
The default name is the switch's MAC address.
Command Mode
MST Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Two or more switches with the same VLAN mapping and configuration version number are considered to
be in different MST regions if the region names are different.
Example
This example shows how to configure the MSTP configuration name to "MName".
Switch# configure terminal
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# name MName
Switch(config-mst)#
70-3 revision
This command is used to configure the revision number for the MST configuration. To return to the default
settings, use the no form of this command.
revision VERSION
no revision
Parameters
VERSION
Default
By default, this value is 0.
Command Mode
Specifies the name given for a specified MST region. The name string
has a maximum length of 32 characters and the type is a general
string which allows spaces.
Specifies the revision number for the MST configuration. The range is
from 0 to 65535.
831