D-Link DXS-3600 Series Cli Reference Manual page 1335

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Usage Guideline
Use this command to display VLAN mapping configurations.
Example
This example shows how to display all VLAN mappings.
Switch# show vlan mapping
Interface
---------
eth1/0/1
eth1/0/1
eth1/0/2
eth1/0/2
eth1/0/3
eth1/0/3
Total entries: 6
Switch#
115-14 show vlan mapping profile
This command is used to display the configured VLAN mapping profile information.
show vlan mapping profile [ID]
Parameters
ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display configured VLAN mapping profile information.
Example
This example shows how to display all VLAN mapping profile information.
Switch# show vlan mapping profile
VLAN mapping profile:1
rule 10 match src-ip 100.1.1.0/24, action dot1q-tunnel outer-vid 100, priority 0
rule 20 match dst-ip 200.1.1.0/24, action dot1q-tunnel outer-vid 200, priority 1
Original VLAN Translated VLAN
------------- ---------------
1 dot1q-tunnel 10
2 dot1q-tunnel 11
10 Translate 100
20 Translate 200
30/3 Translate 300
40/1 Translate 400/2
(Optional) Specifies the ID of the VLAN mapping profile. If not
specifies, display all configured VLAN mapping profiles.
type:ip
Priority Status
―――――
--------
0
5
0
0
0
2
1330
Active
Active
Active
Active
Active
Active