D-Link DXS-3600 Series Cli Reference Manual page 621

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Level: 1.
Usage Guideline
This command is used to display the IS-IS IPv6 routing table information.
Example
This example shows how to display the IS-IS IPv6 routing table information.
Switch# show ipv6 isis route
Codes: C - connected, E – external, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, D - discard, e - external metric
Area (null):
C 1000::/64 [0] via ::, vlan1
Switch#
Display Parameters
Codes
Area
48-37 show ipv6 isis topology
This command is used to display the IS-IS path to the Intermediate System for IPv6.
show ipv6 isis [AREA-TAG] topology [l1 | l2 | level-1 | level-2]
Parameters
AREA-TAG
l1
l2
level-1
level-2
Default
None.
Command Mode
The type of the route. It can be one of the following values:
C - The route is directly connected.
E - The route is imported from other routing domain.
L1 - The route is an area route.
L2 - The route is an inter-area route.
ia - The route is imported from a L2 route.
D - The route is discarded.
e - The route has an external metric.
The IS-IS instance area tag.
(Optional) Specifies the tag of a routing process.
(Optional) Specifies the abbreviation for the level-1 keyword.
(Optional) Specifies the abbreviation for the level-2 keyword.
(Optional) Specifies paths to all level-1 intermediate systems in the
area.
(Optional) Specifies paths to all level-2 intermediate systems in the
domain.
616