D-Link DXS-3600 Series Cli Reference Manual page 1049

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Usage Guideline
Use this command to display the global information of PIM.
Example
This example shows how to display PIM global information.
Switch# show ip pim
PIM Configurations:
Register Checksum Wholepkt: (Not configured)
Register Probe Time
Register Suppression Time
Register Keepalive Time on RP
SPT Threshold
RP Address
90.1.1.1, group-list: static-rp
RP Candidate
priority: 192, interval: 60 seconds, wildcard-prefix-cnt: 0
vlan100, group-list: rp-cand
BSR Candidate
vlan100, hash-mask-length: 30, priority: 1, interval: 60 seconds
SSM group : Movies
Switch#
83-17 show ip pim bsr-router
This command is used to display bootstrap router (BSR) information.
show ip pim bsr-router
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the elected BSR information and information about the locally configured
candidate rendezvous point (RP) advertisement.
: 5 seconds
: 60 seconds
: 185 seconds
: Infinity
1044