D-Link DXS-3600 Series Cli Reference Manual page 1121

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch(config)#
88-4 qcn cnpv (global)
This command is used to globally assign IEEE 802.1p priority as Congestion Notification Priority Value
(CNPV) and generate per-interface CNPV entries with default settings for all ports. Use the no form of
this command to delete a priority from CNPV.
qcn cnpv CNPV-PRIORITY-VALUE [cp-creation {auto-enable | auto-disable}]
qcn cnpv CNPV-PRIORITY-VALUE admin-defense-mode {disable | interior | interior-ready | edge}
qcn cnpv CNPV-PRIORITY-VALUE alternate-priority PRIORITY-VALUE
qcn cnpv CNPV-PRIORITY-VALUE defense-mode-choice {admin | auto}
no qcn cnpv CNPV-PRIORITY-VALUE
Parameters
CNPV-PRIORITY-VALUE
cp-creation
admin-defense-mode
alternate-priority PRIORITY-
VALUE
Specifies the IEEE 802.1p priority value to be the Congestion
Notification Priority Value (CNPV). The valid priority range of CNPV is
from 0 to 7.
(Optional) Specifies that when assigning a priority as the CNPV, you
can specify the default value for the defense mode choice of newly-
created port entries.
auto-enable - Takes comp as the defense mode choice for newly-
created port entries, that is the defense mode and alternate priority are
determined by the global setting.
auto-disable - Takes admin as the defense mode choice for newly-
created port entries, that is the defense mode and alternate priority are
determined by the per-port administrator's setting.
If not specified, the default cp-creation is auto-enable.
(Optional) Specifies the default CND defense mode for this CNPV on
all interfaces. This setting can be overridden by the admin-defense-
mode of per-interface.
disable - The congestion notification capability is administratively
disabled for this priority.
interior - The priority parameter of frame input are not remapped to or
from this priority and the frames are transmitted without a CN-TAG.
interior-ready - The priority parameter of frame input is not remapped
to or from this priority and the CN-TAGs won't be stripped when
transmitting the frames.
edge - The priority parameter of frame input at this priority is
remapped to an alternate value. Frames at other priorities are not
remapped to this priority and the frames are transmitted without a CN-
TAG.
If not specified, the default administrative defense mode is interior.
(Optional) Specifies a priority value to which this priority value is to be
remapped when the receiving frame with a Dot1p priority equal to the
specified CNPV at Edge port. The valid priority range is from 0 to 7.
This value can be overridden by the alternate-priority option of the
per-interface command.
If not specified, the default alternate priority is 0.
1116