D-Link DXS-3600 Series Cli Reference Manual page 1302

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
FACILITY-NAME
discriminator
port UDP-PORT
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
System messages can be logged to the local message buffer, local console or remote hosts. Messages
must enter the local message buffer first before it can be further dispatched to logging server.
The following is a table for the facility.
Facility Number
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
facility. If not specified, the default facility is local7 (23). See the usage
guideline for more information.
(Optional) Specifies a facility name to represent the facility. If not
specified, the default facility is local7 (23). See the usage guideline for
more information.
(Optional) Specifies to filter the message to the log server based on
discriminator.
(Optional) Specifies the UDP port number to be used for the SYSLOG
server. Valid values are 514 (the IANA well-known port) or any value
from 1024 to 65535. If not specified, the default UDP port is 514.
Facility Name
kern
user
mail
daemon
auth1
syslog
lpr
news
uucp
clock1
auth2
ftp
ntp
logaudit
logalert
clock2
local0
local1
local2
1297
Facility Description
Kernel messages.
User-level messages.
Mail system.
System daemons.
Security/authorization messages.
Messages generated internally by the SYSLOG.
Line printer sub-system.
Network news sub-system.
UUCP sub-system.
Clock daemon.
Security/authorization messages.
FTP daemon.
NTP subsystem.
Log audit.
Log alert.
Clock daemon (note 2).
Local use 0 (local0).
Local use 1 (local1).
Local use 2 (local2).