D-Link DXS-3600 Series Cli Reference Manual page 880

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
71-42 show mpls qos
This command is used to display MPLS QoS settings.
show mpls qos {policy [<NAME>] | ip NETWORK-PREFIX/PREFIX-LENGTH | vc IP-ADDRESS
VC-ID}
Parameters
policy
NAME
ip NETWORK-
PREFIX/PREFIX-LENGTH
vc IP-ADDRESS VC-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the MPLS QoS policy settings.
Example
This example shows how to displays all MPLS QoS settings.
Switch# show mpls qos policy
MPLS QoS Policy: policy1, Trust EXP
Inbound EXP to CoS:
EXP : 0, 1, 2, 3, 4, 5, 6, 7
CoS : 0, 1, 2, 3, 4, 5, 6, 6
Outbound CoS to EXP:
CoS : 0, 1, 2, 3, 4, 5, 6, 7
EXP : 3, 6, 3, 3, 3, 3, 3, 3
Binding FECs:
172.18.1.0/24, 110.1.1.0/24
Total Entries: 1
Switch#
This example shows how to display the MPLS QoS setting for FEC 172.18.1.0/24.
Switch# show mpls qos ip 172.18.1.0/24
FEC 172.18.1.0/24 binding MPLS QoS policy: policy1
Specifies to display the MPLS QoS policy.
Specifies the MPLS QoS policy name.
Specifies the IP prefix FEC whose QoS policy will be displayed.
Specifies the VC FEC whose QoS policy will be displayed.
875