D-Link DXS-3600 Series Cli Reference Manual page 718

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
eth1/0/11 SA
Channel Group 2
Member Ports: 2, Maxports = 12, Protocol: Static
Port Flags
--------------------------------------------------
eth1/0/8 N/A
eth1/0/9 N/A
Switch#
This example shows how to display the neighbor information for port-channel 3.
Switch# show channel-group channel 3 neighbor
Flag:
S - Port is requesting Slow LACPDUs, F - Port is requesting Fast LACPDUs,
A - Port is in Active mode,
Channel Group 3
Partner
Port System ID
-------------------------------------------------------------------
eth1/0/1 32768,00-07-eb-49-5e-80
eth1/0/2 32768,00-07-eb-49-5e-80
Switch#
This example shows how to display the load balance information for all channel groups.
Switch# show channel-group load-balance
load-balance algorithm: src-dst-mac
Switch#
This example shows how to display the system identifier information.
Switch# show channel-group sys-id
System-ID: 32765,00-02-4b-29-3a-00
Switch#
This example shows how to display the summary information for all port-channels.
Switch# show channel-group
load-balance algorithm: src-dst-mac
system-ID: 32765,00-02-4b-29-3a-00
Group Protocol
------------------------
bndl 32768
LACP Port
State Priority
bndl N/A
down N/A
P - Port is in Passive mode,
Partner
PortNo
12
13
713
11
Port
Number
N/A
N/A
Partner Partner
Flags Port_Pri.
SP 32768
SP 32768