D-Link DXS-3600 Series Cli Reference Manual page 1074

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
>
115:50:70::/64
[110/2]
via fe80::a00:1ff:fe02:6
vlan10
85-13 show ipv6 route summary
This command is used to display the current state of the IPv6 routing table.
show ipv6 route summary
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
When the system provides forwarding services for IPv6 traffic, it is very important and helpful to check the
forwarding/routing table to understand what the traffic path will be currently in the network.
Example
This example shows how to display the current state of the IPv6 routing table.
Switch#show ipv6 route summary
Route Source
Connected
Static
RIPng
OSPF
ISIS
SLAAC
Total
Switch#
The route with the best distance among routes learned from multiple
protocols.
Indicates the network.
The first number is the administrative distance of the protocol source;
the second number is the metric for the route.
Specifies the next hop to the network.
Specifies the interface through which the specified network can be
reached.
Networks
0
0
0
0
0
0
0
1069