D-Link DXS-3600 Series Cli Reference Manual page 581

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
interface INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the statistic counters for an interface.
Example
This example shows how to display the counters for interface Ethernet 1/0/1.
Switch#show counter interface ethernet 1/0/1
eth1/0/1 counters
rxHCTotalPkts
txHCTotalPkts
rxHCUnicastPkts
txHCUnicastPkts
rxHCMulticastPkts
txHCMulticastPkts
rxHCBroadcastPkts
txHCBroadcastPkts
rxHCOctets
txHCOctets
rxHCPkt64Octets
rxHCPkt65to127Octets
rxHCPkt128to255Octets
rxHCPkt256to511Octets
rxHCPkt512to1023Octets
rxHCPkt1024to1518Octets
rxHCPkt1519to1522Octets
rxHCPkt1519to2047Octets
rxHCPkt2048to4095Octets
rxHCPkt4096to9216Octets
txHCPkt64Octets
txHCPkt65to127Octets
txHCPkt128to255Octets
txHCPkt256to511Octets
txHCPkt512to1023Octets
txHCPkt1024to1518Octets
txHCPkt1519to1522Octets
txHCPkt1519to2047Octets
txHCPkt2048to4095Octets
txHCPkt4096to9216Octets
rxCRCAlignErrors
rxUndersizedPkts
Specifies that the interface can be a physical port or VLAN interfaces.
If no interface is specified, counters of all interfaces will be displayed.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
576