D-Link DXS-3600 Series Cli Reference Manual page 1406

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Default Level
Level: 12.
Usage Guideline
Different types of packets can be queued in different bucket lists and different list can be specified with
different threshold values.
Example
This example shows how to configure the WRED drop parameter for all types and color packets on profile
10.
Switch# configure terminal
Switch(config)# random-detect profile 10 min-threshold 30 max-threshold 50 max-drop
rate 10
Switch(config)#
This example shows how to configure the WRED drop parameter for TCP yellow and red packets on
profile 10.
Switch# configure terminal
Switch(config)# random-detect profile 10 tcp yellow red min-threshold 20 max-threshold
40 max-drop rate 5
Switch(config)#
122-6 show queueing random-detect
This command is used to display the WRED configuration on the specified interface.
show queueing random-detect [interface INTERFACE-ID [,|-]]
Parameters
interface INTERFACE-ID [, | -]
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command will display the WRED configuration. If interface ID is not specified, the WRED
configuration for all ports on the system will be displayed.
Example
This example shows how to display the WRED configuration and CoS queue status on eth 1/0/1.
Switch# show queueing random-detect interface ethernet 1/0/1
(Optional) Specifies the interface ID to be displayed. Specify multiple
interface IDs, which are separated by commas (,) or hyphens (-). No
space is before or after the commas or hyphens.
1401