D-Link DXS-3600 Series Cli Reference Manual page 1362

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch# configure terminal
Switch(config)# l2 vfi vpls100 manual
Switch(config-vfi)# pw-type raw
Switch(config-vfi)#
117-10 show mac-address-table vpls
This command is used to display VPLS MAC address information.
show mac-address-table vpls [VPLS-NAME [peer IP-ADDRESS [VC-ID] | ac INTERFACE-ID [vlan
VLAN-ID]]] [address MAC-ADDR]
Parameters
VPLS-NAME
peer
IP-ADDRESS
VC-ID
ac
INTERFACE-ID
vlan VLAN-ID
address MAC-ADDR
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display VPLS MAC address information.
Example
This example shows how to display all VPLS MAC address information.
Switch# show mac-address-table vpls
VPLS Name
-------------------------------- ----------------- --------------------------
vpls100
vpls100
vpls100
vpls100
vpls100
vpls100
(Optional) Specifies the VPLS name. This name can be up to 32
characters long.
(Optional) Specifies the peer in a VPLS.
(Optional) Specifies the LSR ID that is used to identify the PE to which
the peer belongs to.
(Optional) Specifies the PW ID. The range is from 1 to 4294967295.
(Optional) Specifies the local AC in a VPLS.
(Optional) Specifies the Ethernet interface of a local AC.
(Optional) Specifies the VLAN ID.
(Optional) Specifies the MAC address.
MAC Address
00-08-A1-79-9A-DF
00-08-A1-79-9A-E0
00-08-A1-79-9A-E1
00-08-A1-79-9A-E2
00-08-A1-79-9A-E3
00-08-A1-79-9A-E4
1357
Peer (VC ID/IP) or AC
101/1.1.1.1
101/1.1.1.1
101/1.1.1.1
101/1.1.1.1
101/1.1.1.1
101/1.1.1.1