D-Link DXS-3600 Series Cli Reference Manual page 1114

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the QoS DSCP mutation map configuration.
Example
This example shows how to display the global DSCP mutation map.
Switch# show mls qos map dscp-mutation
DSCP Mutation: mutemapl
Attaching interface:
eth1/0/1-10,eth1/0/13-15
0 1 2 3
--------------------------------
00 00 01 02 03 04 05 06 07 08 09
10 10 11 12 13 14 15 16 17 18 19
20 20 21 22 23 24 25 26 27 28 29
30 30 31 32 33 34 35 36 37 38 39
40 40 41 42 43 44 45 46 47 48 49
50 50 51 52 53 54 55 56 57 58 59
60 60 61 62 63
Switch#
87-26 show mls qos queueing
This command is used to display the QoS queuing information and weight configuration for different
scheduler algorithm on specified interface(s).
show mls qos queuing [interface INTERFACE-ID [, | -]]
Parameters
interface INTERFACE-ID
,
-
Default
None.
4 5 6 7 8 9
(Optional) Specifies the interface ID on which the weight configuration
of different scheduler.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and after
the comma.
(Optional) Specifies a range of interfaces. No space is allowed before
and after the hyphen.
1109