D-Link DXS-3600 Series Cli Reference Manual page 1231

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
show snmp-server [traps]
Parameters
traps
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use the show snmp-server command to display the SNMP server global state settings.
Use the show snmp-server traps command to display trap related settings.
Example
This example shows how to display the SNMP server configuration.
Switch#show snmp-server
SNMP Server
Name
Location
Contact
SNMP UDP Port
SNMP Response Broadcast Request
Switch#
This example shows how to display trap related settings.
Global Trap State : Enabled
Individual Trap State:
Authentication
Linkup
Linkdown
Coldstart
Warmstart
Switch#
101-12 show snmp-server trap-sending
This command is used to display the per port SNMP trap sending state.
show snmp-server trap-sending [interface INTERFACE-ID [, | -]]
(Optional) Specifies to display trap related settings.
: Enabled
: Switch
:
:
: 161
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
1226