D-Link DXS-3600 Series Cli Reference Manual page 806

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
68-4 ip msdp sa-cache-time
This command is used to configure the expiry time for Source-Active cache entries. Use the no command
to revert this to the default setting.
ip msdp sa-cache-time SECONDS
no ip msdp sa-cache-time
Parameters
SECONDS
Default
By default, this value is 145 seconds.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The interval for Source-Active originating is 60 seconds and it cannot be modified, so the Source-Active
cache expiry time allows for the tuning of expected packet loss on a network implicitly.
Example
This example shows how to configure the expiry time for Source-Active cache.
Switch# configure terminal
Switch(config)# ip msdp sa-cache-time 210
Switch(config)#
68-5 ip msdp peer
This command is used to create an MSDP peer. Use the no command to delete an MSDP peer.
ip msdp peer PEER-ADDRESS connect-interface INTERFACE-ID
no ip msdp peer PEER-ADDRESS
Parameters
PEER-ADDRESS
connect-interface
INTERFACE-ID
Default
Specifies the expiry time for Source-Active cache entries in seconds.
The range is from 65 to 65535 seconds.
Specifies the MSDP peer IP address.
Specifies the local interface that is used as the source IP address for
TCP connections.
801