D-Link DXS-3600 Series Cli Reference Manual page 1433

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
thermal-sensor-descr: The sensor ID and position.
degree: The current temperature.
Event description: Temperature recovers to normal.
Log Message: Unit <unit-id> <thermal-sensor-descr> temperature back to normal
Parameters description:
unitID: The unit ID.
thermal-sensor-descr: The sensor ID and position.
Event description: Power failed.
Log Message: Unit <unit-id> <power-descr> failed
Parameters description:
unitID: The unit ID.
power-descr: The power position and ID.
Event description: Power is recovered.
Log Message: Unit <unit-id> <power-descr> back to normal
Parameters description:
unitID: The unit ID.
power-descr: The power position and ID.
Event description: Air flow abnormal.
Log Message: Unit <unit-id> detecting abnormal air flow.
Parameters description:
unitID: The unit ID.
Event description: Air flow recovered.
Log Message: Unit <unit-id> abnormal air flow back to normal.
Parameters description:
unitID: The unit ID.
Port Security
Log Description
Event description: Address full on a port
Log Message: MAC address <macaddr> causes port security violation on
<interface-id>.
Parameters description:
macaddr: The violation MAC address.
interface-id: The interface name.
Event description: Address full on system
Log Message: Limit on system entry number has been exceeded.
RIPng
Log Description
Event description: The RIPng state of interface changed
Log Message: RIPng-6-INTFSTATECHANGE :RIPng protocol on interface <intf-
name> changed state to <enabled | disabled>
Parameters description:
1428
Critical
Critical
Critical
Critical
Critical
Severity
Warning
Warning
Severity
Informational