D-Link DXS-3600 Series Cli Reference Manual page 1028

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
BSR Candidate
vlan100, hash-mask-length: 30, priority: 1
SSM Group : Movies
Switch#
82-18 show ipv6 pim bsr
This command is used to display bootstrap router (BSR) information.
show ipv6 pim bsr {candidate-rp | election | rp-cache}
Parameters
candidate-rp
election
rp-cache
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display details of the BSR election-state machine, C-RP advertisement state
machine, and the C-RP cache. Information on the C-RP state machine is displayed only on a router
configured as a C-RP.
Example
This example shows how to display BSR election information.
Switch# show ipv6 pim bsr election
PIMv2 BSR information
BSR Election Information
This system is the Bootstrap Router (BSR)
BSR Address: 3ffe:6000:3000::123
Uptime: 0DT00H18M50S, BSR Priority: 0, Hash mask length: 126
BS Timer: 0DT00H00M21S
Switch#
Specifies to display the C-RP state on routers that are configured as
C-RPs.
Specifies to displays the BSR state, BSR election, and bootstrap
message (BSM) related timers.
Specifies to display the candidate rendezvous point (C-RP) cache
learned from unicast C-RP announcements on the elected BSR.
1023