Link Layer Discovery Protocol (Lldp) Commands - D-Link DXS-3600 Series Cli Reference Manual

Layer 2/3 managed 10gigabit

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide

61. Link Layer Discovery Protocol (LLDP)

61-1 clear lldp counters

This command is used to delete LLDP statistics.

clear lldp counters [all | interface INTERFACE-ID [, | -]]

interface INTERFACE-ID

Command Mode

Privileged EXEC Mode.

Command Default Level

Usage Guideline

Use this command with the interface keyword to reset LLDP statistics of the specified interface(s). If the

command clear lldp counters is issued with the all keyword to clear global LLDP statistics and the LLDP

statistics on all interfaces. When no optional keyword is selected, only the LLDP global counters will be

This example shows how to clear all LLDP statistics.

Switch# clear lldp counters all

61-2 clear lldp table

This command is used to delete all LLDP information learned from neighboring devices.

clear lldp table {all | interface INTERFACE-ID [, | -]}

Specifies to clear LLDP counter information for all interfaces and

global LLDP statistics.

Specifies the interface to clear LLDP counter information.

(Optional) Specifies a series of physical interfaces. No spaces before

and after the comma.

(Optional) Specifies a range of physical interfaces. No spaces before

and after the hyphen.