D-Link DXS-3600 Series Cli Reference Manual page 1401

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This example shows how to configure the Web authentication virtual IPv4 to be "1.1.1.1" and the FQDN
URL to be "www.website4.co".
Switch# configure terminal
Switch(config)# web-auth virtual-ip
Switch(config)# web-auth virtual-ip
Switch(config)#
This example shows how to Switch# configure terminal configure the Web authentication virtual IPv6 to
be "2000::2" and the FQDN URL to be "www.website6.co".
Switch# configure terminal
Switch(config)# web-auth virtual-ip ipv6 2000::2
Switch(config)# web-auth virtual-ip url www.website6.co
Switch(config)#
121-6 snmp-server enable traps web-auth
This command is used to enable the sending of SNMP notifications for Web authentication. Use the no
command to disable the sending of SNMP notifications.
snmp-server enable traps web-auth
no snmp-server enable traps web-auth
Parameters
None.
Default
By default, this feature is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
None.
Example
This example shows how to enable the sending of SNMP notifications for Web authentication
Switch# configure terminal
Switch(config)# snmp server enable traps web-auth
Switch(config)#
ipv4 1.1.1.1
url www.website4.co
1396