D-Link DXS-3600 Series Cli Reference Manual page 817

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
clear ip msdp sa-cache [GROUP-ADDRESS]
Parameters
GROUP-ADDRESS
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
If the group address is not specified, all Source-Active cache entries will be cleared.
Example
This example shows how to clear all Source-Active cache entries.
Switch# clear ip msdp sa-cache
Switch#
68-21 show ip msdp
This command is used to display the MSDP global configuration.
show ip msdp
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the MSDP global configuration.
Example
This example shows how to display the MSDP global configuration.
Switch# show ip msdp
MSDP global state: Enabled
(Optional) Specifies the group address of the Source-Active cache
entry.
812