D-Link DXS-3600 Series Cli Reference Manual page 596

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Use this command on all switches in an area to prevent unauthorized switches from injecting false routing
information into the link-state database. This password is exchanged as plain text and this is currently the
only authentication type supported. If authenticate snp is not specified, the password will not be inserted
into SNPs.
Example
This example shows how to configure the area password.
Switch# configure terminal
Switch(config)# router isis
Switch(config-router)# area-password al_pass
Switch(config-router)#
48-4 default-information originate
This command is used generate a default route into an IS-IS routing domain. Use the no command to
disable this function.
default-information originate
no default-information originate
Parameters
None.
Default
By default, this feature is disabled.
Command Mode
Router Configuration Mode.
Address Family Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
If this command is specified, IS-IS will generate an advertisement for default routes in its Level 2 link-state
packets (LSPs).
Example
This example shows how to generate a default external route into an IS-IS domain.
Switch# configure terminal
Switch(config)# router isis
Switch(config-router)# default-information originate
Switch(config-router)#
48-5 distance
This command is used to define the administrative distance of IS-IS routes. Use the no command to
restore this value to the default value.
591