Displaying And Debugging Information Center Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Information Center
Quidway S5600 Series Ethernet Switches-Release 1510
Note:
To view debug information of specific modules, you need to set the information type
as debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.
To send information to remote SNMP workstation properly, related configurations
are required on both the switch and the SNMP workstation.
1.3 Displaying and Debugging Information Center
Configuration
After the above configurations, you can execute the display command in any view to
display the running status of the information center, and thus validate you
configurations. You can also execute the reset command in user view to clear the
information in the log buffer and trap buffer.
Table 1-13 Display and debug information center
Display
information channel
Display the operation status
of information center, the
configuration of information
channels, the format of time
stamp and the information
output in case of fabric
Display the status of log
buffer and the information
recorded in log buffer
Display
information recorded in log
buffer
Display the status of trap
buffer and the information
recorded in trap buffer
Clear information recorded
in log buffer
Clear information recorded
in trap buffer
Operation
information on
the summary
Huawei Technologies Proprietary
Command
display channel [ channel-number |
channel-name ]
display info-center [ unit unit-id ]
display logbuffer [ unit unit-id ] [ level
severity | size buffersize ]* [ | { begin |
exclude |
regular-expression ]
display logbuffer summary [ level
severity ]
display trapbuffer [ unit unit-id ] [ size
buffersize ]
reset logbuffer [ unit unit-id ]
reset trapbuffer [ unit unit-id ]
1-14
Chapter 1 Information Center
Descriptio
The
display
command
can
include } executed in
any view
The reset
command
can
executed in
user view
n
be
be