Igmp Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
In Figure 6-2, VLAN interface 2 of Switch B is called the client and VLAN interface 1 of
Switch B is called the proxy.

6.2 IGMP Configuration

You cannot perform other IGMP configuration tasks until you enable the IGMP protocol
after multicast is enabled.
IGMP configuration tasks include:
Table 6-1 Configuration task overview
Operation
Configure IGMP version
Configure IGMP query
packets
Configure IGMP multicast
groups on the interface
Configure router ports to
join
multicast group
Configure IGMP Proxy
Remove the joined IGMP
groups from the interface
6.2.1 Configuring IGMP Version
Table 6-2 Configure IGMP version
Operation
Enter system view
Enable
routing protocol
Enter
view
Enable
current interface
Configure
version of the Layer 3
switch (router)
Description
Optional
Optional
Optional
the specified Optional
Optional
Optional
system-view
the multicast multicast
routing-enable
VLAN interface interface Vlan-interface
interface-number
IGMP on the
igmp enable
the IGMP
igmp version { 1 | 2 }
Huawei Technologies Proprietary
Related section
Section 6.2.1
Version
Section 6.2.2
Query Packets
Section 6.2.3
Multicast Groups on the Interface
Section 6.2.4
Ports to Join the Specified Multicast
Group
Section 6.2.5
Proxy
Section 6.2.6 Removing the Joined
IGMP Groups from the Interface
Command
6-6
Chapter 6 IGMP Configuration
Configuring IGMP
Configuring IGMP
Configuring IGMP
Configuring Router
Configuring IGMP
Description
—
Enable the multicast
routing protocol
—
Required
IGMP is disabled on the
interface by default.
Optional
IGMP version 2 is used by
default.