Huawei Quidway S5600 Series Operation Manual page 370

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Caution:
Routes received by a BGP router are filtered, and only those matching the specified
ACLs are added to the routing table.
A peer group member and the peer group can use different inbound routing policies,
that is, peers of a peer group can use different route filtering policies for receiving
routing information.
5.4.8 Configuring BGP-IGP Route Synchronization
Table 5-11 Configure BGP-IGP route synchronization
Operation
Enter system view
Enable BGP, and enter
BGP view
Disable BGP-IGP route
synchronization
Caution:
BGP-IGP route synchronization is not supported on Quidway S6500 series Ethernet
switches.
Command
Specify an
IP prefix
list-based
peer {
BGP route
ip-address
filtering
ip-prefix-name import
policy for a
peer/peer
group
Command
system-view
bgp as-number
undo synchronization
Huawei Technologies Proprietary
5-25
Chapter 5 BGP Configuration
group-name |
} ip-prefix
—
Required
By
disabled.
Required
By default, BGP routes and
IGP
synchronized.
Description
Description
default, BGP is
routes are not