Huawei Quidway S5600 Series Operation Manual page 553

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
Note:
Actually, the RADIUS protocol configuration only defines the parameters used for
information exchange between the switch and the RADIUS servers. To make these
parameters take effect, you must reference the RADIUS scheme configured with these
parameters in an ISP domain view. For specific configuration commands, refer to
section 1.3 "AAA Configuration".
1.4.1 Creating a RADIUS Scheme
The RADIUS protocol configuration is performed on a RADIUS scheme basis. You
should first create a RADIUS scheme and enter its view before performing other
RADIUS protocol configurations.
Table 1-12 Create a RADIUS scheme
Operation
Enter system view
Create
scheme and enter its
view
Caution:
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.
1.4.2 Configuring RADIUS Authentication/Authorization Servers
Table 1-13 Configure RADIUS authentication/authorization server
Enter system view
Create a RADIUS scheme
and enter its view
system-view
a RADIUS
radius
radius-scheme-name
Operation
Huawei Technologies Proprietary
Chapter 1 AAA & RADIUS & HWTACACS
Command
—
Required
scheme
By default, a RADIUS scheme
named "system" has already
been created in the system.
Command
system-view —
Required
radius scheme
By
radius-scheme-na
scheme named "system" has
me
already been created in the
system.
1-23
Configuration
Description
Description
default, a RADIUS